General information
NOTE
For RF unit type...
2011
2012
The transceiver uses double conversion in both the Receive and Transmit modes. Only
the 455 kHz sideband filter and the local oscillators VCO and REF OSC are common to
both modes of operation.
The signal routing is determined by switching and control voltages according to the
selected mode.
NGT Transceiver System Technical Service Manual
The information in this section should be read in conjunction with the
appropriate block diagram for the RF unit. See below to determine which
block diagram you should be viewing.
NGT—Brief description (2011/2012)
See...
03-01126
03-01190
65