Table of Contents
Advertisement
NGT—Checks and adjustments
Returning to Normal mode
To return the transceiver to Normal mode:
1
1
1
The transceiver is now in Normal mode and normal operation can resume.
158
Switch off the transceiver.
Remove:
•
link 11 on the Microprocessor PCB in the junction box (see drawing
and
Figure 25 on page
•
link A on the Application Processor Handset I/F 3 V PCB in the 2011 (see
drawing
08-05987
•
link A on the Application Processor Handset & Data I/F PCB in the 2012 (see
drawing
08-06260
Switch on the transceiver.
154), or
and
Figure 26 on page
and
Figure 27 on page
NGT Transceiver System Technical Service Manual
155)
155)
08-05317
Advertisement
Chapters
Table of Contents
