European Radio And Telecommunications Terminal Equipment Directive - Codan NGT 2010 RF Technical & Service Manual

European Radio and Telecommunications Terminal
Equipment Directive
The NGT series Transceivers have been tested and comply with the following standards
and requirements (articles of the R&TTE Directive):
•
•
•
•
•
The 3061/3062 Power Amplifiers have been tested and comply with the following
standards and requirements (articles of the R&TTE Directive):
•
•
•
•
•
•
The NGT Remote Interface 3030 and HF Data Modem 3012 have been tested and
comply with the following standards and requirements (articles of the R&TTE
Directive):
•
•
•
•
•
Product marking and labelling
Any equipment supplied by Codan that satisfies these requirements is identified by the
0191
Declarations of Conformity
The CE Declarations of Conformity for this product range available upon request to
Codan or a Codan-authorised supplier.
NGT Transceiver System Technical Service Manual
Article 3.1b: ETSI EN 301 489-1
Article 3.1b: ETSI EN 301 489-15
Article 3.2: Australian type approval according to AZ/NZS 4770:2003 or ECR 209
Article 3.1a: assessed against ICNIRP and FCC requirements
Article 3.1a: EN 60950
Article 3.1b: ETSI EN 301 489-1
Article 3.1b: ETSI EN 301 489-15
Article 3.2: Australian type approval according to AZ/NZS 4770
Article 3.1a: assessed against ICNIRP
Article 3.1a: EN 60950
Article 3.1a: EN 50392
Article 3.1b: ETSI EN 301 489-1
Article 3.1b: ETSI EN 301 489-15
Article 3.1b: EN 55022 (CISPR 22)
Article 3.1b: 47CFR15
Article 3.1a: EN 60950
, , or markings on the model label of the product.
0191
Compliance
19