Editing A Channel - Codan NGT 2010 RF Technical & Service Manual

NGT—Channel additions
1

Editing a channel

NOTE
To edit a channel:
1
1
1
1
1
142
If you want to view the channel, close the List Manager by pressing
Press until Main Menu is displayed.
If the TxD option has been installed in the transceiver you cannot enable
or disable the transmit frequency of a channel by editing the channel. See
page 137, Creating a channel with the TxD option
until Main Menu is displayed.
Press
Select Channel.
Go to the entry you want to edit. For example:
NOTE Use or
Press to display the settings for the entry.
The first setting (Receive Freq) is displayed.
Scroll to the setting you want to edit, then hold
The following table explains how to edit each setting.
to scroll to the entry, or use the Find feature.
NGT Transceiver System Technical Service Manual
.
instead.
.