Codan NGT 2010 RF Technical & Service Manual page 715

Specifications
General
Power requirements
13.5 V DC nominal, 250 mA maximum (operating voltage range 10.5 to 15 V DC)
Data mode
High-speed selective repeat ARQ data transfer
2400 bps, 16-channel QPSK (selectable between 4 and 16 channels)
Effective transmission rate
uncompressed
compressed
Link establishment mode
Proprietary link establishment
2400 bps HF modem
TMS320C31 32-bit digital signal processor, 27 MHz
TR.29 based 'AT' port, 9600 baud RS232
Data compression
Transceiver control lines and press-to-talk
Front panel indicators
Throughput
NGT Transceiver System Technical Service Manual
1475 bps (under optimum conditions)
Up to 6000 bps
80 baud CHIRP
1 × multicolour LED
10 × red LEDs indicating approximately 100 bps
per LED when using 16 channels QPSK
3012—Overview and specifications
295