Engine Error Codes - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Diagnostic Trouble Codes (DTC)
9.2

Engine Error Codes

Observe the following if an error is displayed in the instrument display:
Machine travel or operation is prohibited in case of major errors.
■ Engine performance is reduced.
■ Stop and park the machine.
■ Contact a Wacker Neuson service center and have the malfunction rectified.
Machine travel and operation is possible in case of minor errors.
■ Engine performance is not reduced.
■ Contact a Wacker Neuson service center and have the malfunction rectified.
Note: Possible errors are displayed in the instrument display for a few seconds
when the machine is started. For more information about the instrument display
pages see the Controls chapter.
Symbol
!
!
M
!
wc_gr014147
Engine control unit error
Indicates engine errors.
wc_gr014656
Machine control unit error
Indicates machine errors.
wc_gr014658
No error
If there is no error, the marked symbol appears in the service tool
"Engine error/machine status/drive status."
The corresponding symbol flashes and is displayed at the bottom in
addition.
94
CRT60-74LX
wc_tx004003gb_FM10.fm