Operation
5.10
Using the Retardant Spray System
The retardant spray system is controlled by a switch located on the right joystick.
Requirements ■ Water or water-based retardant in water tank
■ Ambient temperature above freezing
Procedure
Perform the procedure below to operate the retardant spray system.
1. Fill the water tank (d) with clean water or water-based retardant.
2. Open the valve (a).
b
3. Press and hold the water spray switch (b) to activate the pump. The water or
retardant will spray from the two nozzles (c).
NOTICE: Drain the retardant spray system if the machine will be subject to
temperatures below freezing. Frozen water or frozen retardant may damage the
retardant spray system.
c
50
CRT60-74LX
d
wc_gr014518
wc_tx003645gb_FM10.fm
a