Removing Sediment From The Fuel Tank - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

CRT60-74LX
6.12

Removing Sediment from the Fuel Tank

Requirements ■ Machine shut down
■ Suitable container
Procedure Prepare the procedure below to drain sediment from the fuel tank.
1. Locate the fuel line (a) on the fuel tank (b).
2. Place a suitable container under the area of the fuel valve (c).
3. Disconnect the fuel line to expose the fuel valve.
4. Open the fuel valve and allow sediment to drain into a suitable container.
Note: Collect, store and dispose of all used fluids in accordance with current
environmental protection regulations.
5. Close the fuel valve.
6. Connect the fuel line.
wc_tx004561gb.fm
b
a
75
Maintenance
b
c
wc_gr012741