Instrument Display Menu Behavior; Instrument Display Subpages - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Controls
4.5

Instrument Display Menu Behavior

When a control is activated, the display will show the newly activated control
symbol in the center of the instrument display for a few seconds and then return to
the home display mode.
Note: Most, but not all, of the new commands will remain showing in one of the top
five windows until it is changed.
4.6

Instrument Display Subpages

Navigate to each subpage using the selector button (a) and next menu button (b)
on the instrument display. When selected, a subpage remains active for 5 seconds
before returning to the main page.
Service hour This page is only available when the service counter reaches 0.0 hours.
reset
After counting down from 500 hours, the service icon flashes when the counter
reaches 0.0 hours.
To reset the service counter, use the selector button (a) and the next menu
button (b) at the bottom of the instrument display to enter the reset code—12345. If
the code is entered correctly, the service counter will be reset to 500.0 hours.
a
b
wc_gr014510
wc_gr014506
40
CRT60-74LX
wc_tx004017gb_FM10.fm