Inspecting The Hydraulic System - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Operation
5.6

Inspecting the Hydraulic System

This machine features several components that are powered by hydraulic oil.
These include the drive motors, wheel kit, and the pitch cylinders.
A diagram of the hydraulic system is provided in the Schematics chapter at the
back of this Operator's Manual. The Schematics chapter also includes a chart of
hydraulic pressure test locations and recommended operating pressures.
When Inspect the hydraulic system daily before starting the machine.
Checklist Below is a list of possible conditions that may be observed when inspecting the
hydraulic system.
NOTICE: If any of the following conditions exist, take the machine out of service
immediately and arrange for repairs.
 Dirty hydraulic oil, incorrect hydraulic oil, or lack of hydraulic oil
 Cloudy hydraulic oil in the overflow bottle (signifies water or air contamination)
 Damaged or leaking fittings
 Worn, cut, or torn hose casings
 Swollen hose casings
 Crushed or pinched hose
 Metal shavings visible in the filter
46
CRT60-74LX
wc_tx003645gb_FM10.fm