Using The Work Lights; Before Starting - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

CRT60-74LX
5.13

Using the Work Lights

The machine is equipped with three pairs of work lights. The work lights are
controlled by a rocker switch (m) next to the left joystick.
■ To turn on the lights, press the front of each rocker switch.
■ To turn off the lights, press the rear of each rocker switch.
5.14

Before Starting

Requirement Operator must be familiar with the location and function of all controls.
Checklist Check the following items before starting the trowel:
 Fuel level—add fuel as needed
 Oil level in the engine—add oil as needed
 Hydraulic oil level—add oil as needed
 Air filter—element is clean and undamaged
 Trowel arms and blades—functional and undamaged
 Wiring and electrical connections—check every 50 hours
wc_tx003645gb_FM10.fm
m
wc_gr014511
53
Operation