Maintaining The Hydraulic Oil - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Maintenance
6.9

Maintaining the Hydraulic Oil

When ■ Check the hydraulic oil level daily, adding fresh oil if necessary.
■ Replace the hydraulic oil and hydraulic oil filter every 250 hours if the machine is
being operated in hot climates (in temperatures above 32°C (90°F)).
■ Replace the hydraulic oil and hydraulic oil filter every 500 hours
Requirements ■ Machine shut down
■ Fresh hydraulic oil, as needed. (See Hydraulic Oil Requirements in this chapter,
or Trowel in the Technical Data chapter.)
■ Replacement hydraulic oil filter. See Changing the Hydraulic Oil Filter.
■ Plastic cloth and a container of sufficient volume to collect drained oil
Note: Collect, store and dispose of drained oil in accordance with current environ-
mental protection regulations.
Checking the The hydraulic oil fill port (a) is located at the rear of the machine. Use this fill port
hydraulic oil
when refilling a high volume of hydraulic oil. Low volumes of hydraulic oil can be
level
added to the overflow bottle (b).
b
This procedure continues on the next page.
a
70
CRT60-74LX
wc_gr014653
wc_tx004561gb.fm