Recommended Fuel; Refueling The Machine - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

CRT60-74LX
5.4

Recommended Fuel

The engine requires the same type of diesel fuel as used in cars (EN590 for E.U. -
ASTM D975-09B regulation - S 15 for U.S).
damage the engine. Biodiesel fuels containing 10% methyl ester or BIO are
suitable for use, provided they meet the specifications listed in the engine manual.
Use only fresh, clean, undiluted fuel. Fuel containing water or other contaminants
will damage the fuel system. Consult the engine owner's manual for complete fuel
specifications.
5.5

Refueling the Machine

Requirements ■ Machine shut down
■ Engine cool
■ Machine/fuel tank level with the ground
■ Fresh, clean fuel supply
Procedure Perform the procedure below to refuel the machine.
WARNING
Fire hazard. Fuel and its vapors are extremely flammable. Burning fuel can cause
severe burns.
► Keep all sources of ignition away from the machine while refueling.
► Do not refuel if the machine is positioned in a truck fitted with a plastic bed liner.
Static electricity can ignite the fuel or fuel vapors.
► Refuel only when the machine is outdoors.
► Clean up spilled fuel immediately.
1. Remove the fuel cap.
2. Fill the fuel tank until it is full.
CAUTION
Fire and health hazard. Fuel expands when heated. Expanding fuel in an over-filled
tank can lead to spills and leaks.
► Do not overfill the fuel tank.
3. Reinstall the fuel cap.
wc_tx003645gb_FM10.fm
Use of other types of fuel could
45
Operation