Cleaning The Machine - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Maintenance
6.16

Cleaning the Machine

Regular cleaning is essential for keeping the trowel in serviceable condition. It is
important to remove uncured concrete, dust and dirt from the trowel as soon as
possible after work has been completed.
When Clean the machine after each use.
Requirements ■ Engine stopped and machine cool to the touch
■ Fresh, clean water supply
■ Pressure washer
■ Clean, soft cloths
Procedure Perform the procedure below to clean the machine.
1. Use a pressure washer to remove concrete and debris from the trowel blades,
wheels, and ring guards.
2. Keeping a minimum distance of 1 meter (3 feet) away, use the pressure washer
to rinse the trowel body.
NOTICE: Direct, high water pressure at close range will damage certain
components on the machine. The following components should be wiped clean by
hand using a damp, clean cloth. Do not apply high pressure spray to these
components:
■ Oil cooler, fan, and connecting hoses
■ Fuel cooler, fan, and connecting hoses
■ Operator's station including the seat, joysticks, control switches, key switch,
indicator lights, and throttle control
■ Foot pedal
■ Hydraulic manifold
■ Fuse boxes
■ Electronic controller
■ Electrical connectors
80
CRT60-74LX
wc_tx004561gb.fm