Instrument Display - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Controls
Operator The Ride-On Trowel features a seat with an integrated operator presence system
presence
which works in conjunction with the engine controller. This system allows the
system
engine to remain running with no operator in the seat, but will not allow blade
movement.
Learning to To familiarize a new operator with the Ride-On Trowel, the following steps should
operate the
be taken:
trowel
■ With the operator in the seat, show him or her the functions of the joysticks (c)
and how to start the machine.
■ Have the operator practice steering the trowel. A hard concrete slab slightly
wetted with water is an ideal surface on which to practice.
■ Pitch the blades up approximately 6.35 mm (1/4 in.) on the leading edge. Start
by making the machine hover in one spot, and then practice moving the
machine in a straight line and making 180° turns.
4.3

Instrument Display

The instrument display informs the operator of the operating states, required
maintenance, or possible machine malfunctions.
j
h
a
k
g
f
36
CRT60-74LX
b
e
wc_gr014505
wc_tx004017gb_FM10.fm
c
d