Operating The Gyroscopic Steering Assist - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Ride-on trowel
Table of Contents

Advertisement

Operation
5.12

Operating the Gyroscopic Steering Assist

The machine is equipped with a gyroscopic steering assist system. When
activated, the steering assist helps the operator maintain forward and reverse
headings by reducing nuisance machine rotation due to variations in the concrete
surface. The effect of the steering assist will benefit the operator with smoother
steering and fewer corrections when both joysticks are being used to direct
machine movement forward or rearward. The steering assist system does not
apply to side to side motion of the machine, nor is it an auto-pilot system.
The gyroscopic steering assist is activated by the switch (hh) next to the key
switch. An indicator lamp in the switch illuminates when the steering assist is
active.
CAUTION
Possible loss of machine control. The steering assist aids in maintaining a straight
heading only and does not steer the machine.
► Keep both hands on the joysticks even when the steering assist is active.
► The steering assist system does not lock the control joysticks into position.
Activating the
Perform the procedure below to activate the steering assist.
steering
1. Press the front of the steering assist switch to activate.
assist
2. Press the joysticks forward until the desired forward travel speed is reached.
Steering assist will aid in maintaining a straight path. Centering of the control
joysticks towards the neutral position will slow the travel of the machine.
3. Use the joysticks to steer the machine as usual.
Deactivating
To deactivate the steering assist, press the rear side of the steering assist switch.
the steering
assist
Note: Steering assist is intended to reduce operator fatigue by reducing input
corrections on large, unobstructed flatwork slab projects. The steering system
should be deactivated during finishing operations on elevated slabs, and when
close maneuvering around pop-ups or other objects on the slab is necessary.
hh
wc_gr014527
52
CRT60-74LX
wc_tx003645gb_FM10.fm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents