Mounting Float Pans - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Maintenance
6.4

Mounting Float Pans

Certain applications may require the use of float pans. Optional float pans are
available from your Wacker Neuson dealer.
Procedure Perform the procedure below to mount the float pans.
1. Stop the engine.
2. Lift the trowel to access the blades (a). See Lifting the Machine.
3. Support the frame with blocks while the machine is elevated.
4. Position each pan (b) against the blades, aligning each blade with a pocket on
the pan.
Note: Right-hand trowel blades turn counter-clockwise; left-hand trowel blades turn
clockwise.
5. Engage safety latch pins (c) over the blades to secure the pans to the trowel.
6. Lower the trowel.
WARNING
Personal injury hazard. Float pans can fall off a raised trowel, striking nearby
personnel.
► Do not lift the trowel overhead after float pans have been mounted.
c
64
CRT60-74LX
a
b
wc_gr008925
wc_tx004561gb.fm