Operating The Cruise Control - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

CRT60-74LX
5.11

Operating the Cruise Control

The machine is equipped with an automatic blade speed control ("cruise control")
system. When activated, the cruise control maintains rotor speed while allowing the
operator to remove his/her foot from the foot pedal.
CAUTION
Possible loss of machine control. The cruise control maintains rotor speed only and
does not steer the machine.
► Keep both hands on the joysticks even when the cruise control is active.
Activating the Perform the procedure below to activate the cruise control.
cruise control
1. While the machine is operating, press the foot pedal until the desired blade
speed is reached.
2. Press the front of the cruise control switch to set the blade speed.
3. Release the foot pedal and use the joysticks to steer the machine as usual.
Deactivating To deactivate the cruise control, perform one of the following actions:
the cruise
■ Press the cruise control switch.
control
■ Press the foot pedal.
wc_tx003645gb_FM10.fm
The cruise control system is activated by the switch (l) next to the right
joystick. The cruise control symbol appears in the center of the display
when the cruise control is active.
l
wc_gr008144
51
Operation