Lifting And Transporting; Lifting The Machine - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Lifting and Transporting

3 Lifting and Transporting
3.1

Lifting the Machine

Requirements ■ Lifting equipment (crane, hoist, or forklift truck) capable of supporting the
machine's weight. See the Technical Data chapter.
■ Lifting devices (hooks, chains, and shackles) capable of supporting the
machine's weight.
■ Engine stopped.
■ All access covers closed and secured.
WARNING
Crushing hazard. You may be crushed if the lifting devices fail.
► Never stand under, or get onto, the machine while it is being lifted or moved.
WARNING
Crushing hazard. The machine can drop if it is lifted by the guard rings or any other
part of the frame. These components are not designed to support the weight of the
machine.
► Use only the designated lifting points to lift the machine.
Procedure Perform the procedure below to lift the machine.
1. Attach lifting devices as follows:
■ Use lifting locations (c) to triangulate to one lifting point.
■ Use lifting locations (b) for lifting with two lifting points.
OR
■ Insert the forks of a forklift truck into the fork pockets (a).
Note: The machine is equipped with two fork pockets (a) on the front and back,
and two lifting locations (b) and (c). The lifting locations are provided to
accommodate different types of lifting devices.
2. Lift the machine a small distance.
WARNING
Crushing hazard. An unstable machine may cause the lifting device to fail. You may
be crushed if the lifting device fails.
► Check for stability before continuing.
3. Check for stability. If necessary, lower the machine, reposition the lifting devices,
and lift the machine a small distance again.
4. Continue lifting the machine only when it is stable.
NOTICE: To avoid machine damage, ensure that the lifting devices do not touch or
interfere with the joysticks.
30
CRT60-74LX
wc_tx003644gb_FM10.fm