Starting And Stopping The Machine - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Operation
5.15

Starting and Stopping the Machine

Requirements ■ Machine is in serviceable condition and has been properly maintained
■ There is fuel in the tank
DANGER
Asphyxiation hazard. Engine exhaust contains carbon monoxide which CAN KILL
YOU IN MINUTES. This is a poison that you cannot see or smell.
► Do not start the engine in enclosed spaces.
WARNING
Explosion hazard.
► Do not use evaporative starting fluids such as ether on this engine.
Starting the Perform the procedure below to start the engine.
machine
1. Sit in the operator's seat.
2. Turn the key to the ON position. The engine preheat symbol on the instrument
display illuminates, and the engine proceeds through a preheat cycle.
3. Once the engine preheat light turns off, turn the key to the START position.
When the engine starts, release the key. See Warm-up time on the next page.
NOTICE: Do not crank the engine for more than 15 seconds. If the engine does not
start, allow at least one minute between cranking attempts.
4. Set the engine speed to FAST.
5. Press the foot pedal to control the blade speed.
This procedure continues on the next page.
54
CRT60-74LX
wc_tx003645gb_FM10.fm