Checking The Engine Oil - Husqvarna CRT48-33K Operator's Manual

CRT 48-33K
5.16

Checking the Engine Oil

Requirements Park the machine on a level surface

Shut down the machine

When Every 10 hours of service or daily
Procedure Perform the procedure below to check the engine oil.
1. Clean around the dipstick (a).
2. Extract the dipstick and check the oil level. Maintain the oil level between the
two markings on the dipstick.
3. Remove the oil filler cap (b) and add oil as needed. When full, the oil level will
reach the upper mark on the dipstick (c).
NOTICE: Do not overfill the machine with oil. Overfilling the engine with oil may
lead to excessively high operating temperatures.
4. Re-install the oil filler cap after adding oil.
wc_tx002046gb.fm
b
c
a
wc_gr009291
65
Maintenance