Lifting And Transporting; Lifting The Machine - Husqvarna CT 36 Series Operator's Manual

Walk-Behind Trowels
3

Lifting and Transporting

3.1

Lifting the Machine

WARNING
Personal injury hazard. NEVER lift the machine solely by the handle.The
component may fail, causing the machine to fall, possibly injuring bystanders.
Manual lifting requirements
■ Motor stopped
■ A partner to help lift
Manual lifting
To manually lift the machine, perform the procedure below.
1. Stop the engine.
2. Grip the machine by the guard ring (a) or attach and grip the optional lifting
bracket (c).
a. Attach the optional lifting bracket to the trowel with screws and locknuts.
b. Insert a 2x4 or other suitable lumber into the bracket. The lumber must be
c. Grip the machine by the handle and the lumber.
3. Balance the weight between the partners.
This procedure continues on the next page.
wc_tx004126gb_FM10.fm
Torque the screws to 25 Nm (18 ft.lbs.).
long enough to extend past the ring guard.
c
a
Lifting and Transporting
25
b
a
wc_gr001762