Grid Limits; Ground Connection; Connection Time; Total Reset - Ingeteam Ingecon Sun Power Series Installation Manual

Installation manual
Press the button to scroll down the various languages and

Grid limits

In this menu, you can change the grid quality parameters. This menu is only active after the security code has been
input.

Ground connection

Through this option, you can change the type of grounding for the PV array. This menu is only active after the security
code has been input.

Connection time

This menu allows you to modify the delay before the inverter connects to the grid. This menu is only active after the
security code has been input.

Total reset

With this option, the user can reset all inverter counters. This menu is only active after the security code has been
input.

Other adjustments

Various internal adjustments.

Change NumCAN

From this menu you can change the node number. This is useful for units with more than one electronics block, and
should not be changed on the unit unless so instructed by Ingeteam.

8.7. Inverter data

This window displays inverter-specific data:
Serial Number (NS)
Firmware Version (Firm)
Display firmware version (FirmDis)
Boot version of the display (BootDis)
AAS2000IKI01
10:22
LANGUAGE
Spanish
English
Italian
French
10:22
INVERTER DATA
NS: 250091221R34
Firm: AAS1040_P
CRC: 9789
FirmDis: 1091_B
BootDis: 1012_B
Number that identifies the inverter.
Shows the name and version of the inverter firmware.
Shows the name and version of the inverter display.
Shows the name and version of the display Boot.
Ingeteam Power Technology, S.A.
14/04/11
to confirm the selection.
14/04/11
53