Ingeteam Ingecon Sun Power Series Installation Manual page 26

Ingeteam Power Technology, S.A.
The dimensions of the unit, for units with and without (TL) a transformer, are as follows: Bear in mind the clearance
between the pins of the fixing plates and the floor (if they are fitted):
Once the location of the equipment has been selected, follow these steps:
1. Mark the fixing points for the plates on the floor.
2. Drill the floor with a recommended drill for the fixture supplied with the fastening plate.
3. Anchor the fixing plates to the floor.
4. Screw the fixing plates to the unit.
5. Check that the unit is properly secured.
24
840
980
1031
760
1040
Installation manual
640
780
832
AAS2000IKI01