Overview; Equipment Description; Models - Ingeteam Ingecon Sun Power Series Installation Manual

Installation manual

1. Overview

The purpose of this manual is to describe the Ingecon
correct receipt, installation, start-up, operation and maintenance.

1.1. Equipment description

An inverter is a circuit used to convert direct current to alternating current. The function of the Ingecon
units is to convert the direct current generated by photovoltaic solar panels to alternating current and so enable it to
be fed to the electricity grid.

1.1.1. Models

The Ingecon Sun Power product family is split into two: units with a transformer and units without a transformer (TL).
®
Units with a transformer
Ingecon
Ingecon
Ingecon
Ingecon
Ingecon
Ingecon
Units with a transformer are designed to be connected directly to the 400 Vac low voltage public grid.
TL modes have different AC output voltages and are designed for connection to a private network with an IT configura-
tion (with floating neutral) connected in turn to the distribution grid. This means that the neutral of the private network
must be insulated from ground.
The various output voltages are as follows:
All units have a similar outward appearance:
AAS2000IKI01
®
Sun 50
®
Sun 60
®
Sun 70
®
Sun 80
®
Sun 90
®
Sun 100
®
Model
Ingecon Sun 50
®
Ingecon Sun 60
®
Ingecon Sun 70
®
Ingecon Sun 80
®
Ingecon Sun 90
®
Ingecon Sun 100
®
Ingecon Sun 100 TL
®
Ingecon Sun 125 TL
®
Ingecon Sun 150 TL
®
Ingecon Sun 180 TL
®
Ingecon Sun 200 TL
®
Ingecon Sun 210 TL
®
Sun Power unit and to give appropriate information for its
Units without a transformer
Ingecon Sun 100 TL
®
Ingecon Sun 125 TL
®
Ingecon Sun 150 TL
®
Ingecon Sun 180 TL
®
Ingecon Sun 200 TL
®
Ingecon Sun 210 TL
®
AC output voltage
AC 3x400 V output
AC 3x220 V output
AC 3x275 V output
AC 3x320 V output
AC 3x345 V output
AC 3x360 V output
Ingeteam Power Technology, S.A.
Sun Power
®
9