Description Of Terminal Strip; Equipment Layout - Ingeteam Ingecon Sun Power Series Installation Manual

Installation manual

9.7. Description of terminal strip

The terminal strip is made up of type ZKS plug-in connectors and type WDU screw-in terminals.
1 ... 8
X1
X1 Monitoring signals
X1.1 DC monitoring
X1.2 Thermal monitoring
X1.3 Monitoring of contact
X1.4 Monitoring of AC arresters
X3 Contactor, communications, start-stop
X3.1 Contactor coil 1
X3.2 Contactor coil 2
X4 Panel voltage intake
X4.1 - BUS (negative from the PV array)
X4.2 Ground
X5 Insulation fault, grid voltage intake, fans
X5.1 NO contact insulation fault/power on
X5.2 NO contact insulation fault/power on
XDC Night supply connection
XDC.1 + night SUPPLY

9.8. Equipment layout

Here is the general view of the main components: The unit with a transformer can be seen first, followed by the TL:
AAS2000IKI01
1 ... 12 1 ... 9
X2 X3
1 ... 3
X4
X1.5 Monitoring AC thermomagnetic circuit
breakers X1.6
X1.6 GND
X1.7 +15
X1.8 +15
X3.8 Start-stop 1
X3.9 Start-stop 2
X4.3 + BUS (negative from the PV array)
X5.3 AC fans
X5.4 AC fans
XDC.2 - night SUPPLY
Ingeteam Power Technology, S.A.
1 ... 4 1 ... 4 1 2
XAC X5 XDC
67