Front Panel Features
NOTE: Figure 11 shows the FOX3 T 301 transmitter and FOX3 R 301 receiver. The
A
A A
Figure 11.
A
B
C
D
FOX3 T/R 311 units look similar, with the exception of the USB ports (
FOX3 T/R 311 have no USB 2.0 LEDs.
INPUTS
DIGITAL AUDIO
SIGNAL
CONFIG
HDCP
ANALOG AUDIO
B B
B
C C
C
INPUT
USB
HOST
SIGNAL
USB HID
CONFIG
HDCP
USB 2.0
Transmitter and Receiver Front Panel Features
Power LED — The unit is receiving power and is operational.
Configuration port — This USB mini-B port is used to configure the unit and to
update firmware.
Input LEDs
•
Signal LED — Lights when the unit detects an input video signal.
HDCP LED — Lights when the input signal is HDCP encrypted.
•
•
Digital Audio LED — Lights when digital audio is selected on the transmitter.
Analog Audio LED — Lights when analog audio is selected on the transmitter.
•
USB LEDs —
•
Transmitter — The HID Host LED and 2.0 Host LED light when the unit is
connected to the host device.
•
Receiver —
USB HID Host LED — When the transmitter and receiver are connected
•
through the SFP port and a host device is connected to the transmitter, the
LED remains lit to indicate an active connected device.
USB HID 1 and 2 LEDs —When an active USB peripheral device is connected
•
to the HUB ports on the receiver, the LED remains lit to indicate an active
connected device.
USB 2.0 Host LED — When the transmitter and receiver are connected
•
through the SFP port and a USB 2.0 Host device is connected to the
transmitter, the LED remains lit to indicate an active connected device.
•
USB 2.0 1 LED — When the transmitter and receiver are connected through
the SFP port and a USB 2.0 Host device is connected to the transmitter, the
LED remains lit to indicate an active connected device.
FOX3 T/R 301/311 Transmitters and Receivers • Installation and Operation
USB
HID HOST
2.0 HOST
D
D D
1
2
D
). The
FOX3 T 301
FOX3 R 301
17
•