Extron electronics FOX3 T 301 User Manual page 42

4. Scroll down to the alphabetic navigation bar (see figure 18).
Figure 18. Software Installation
5. Click the appropriate letter to locate the software or firmware.
6. Click Download and follow the on-screen instructions (see figure 19,
Figure 19. PCS Software Download
For Firmware:
Figure 20. Firmware Page with Alphabetic Navigation Bar
a. Click the letter F from the alphabetic navigation bar (see figure 20,
b. Scroll down the page to find the firmware for the FOX3 T/R 301/311.
c. (Optional) Click Release Notes (
update.
d.
Click Download (
3
e. Enter the required user information and click Download. An executable (.exe) file is
downloaded to the PC. Run this program to place the firmware on the PC for future
use. Make a note of the folder where the firmware file was saved.
7. Install the software.
a. Navigate to the folder where the software file was downloaded.
b. Double-click the executable file and follow the on-screen directions to install the
software.
For Firmware:
a. To install via PCS, see Update Firmware in the
b. To install via the internal web pages, see the
FOX3 T/R 301/311 Transmitters and Receivers • Configuration Software
) for more information about the firmware
2
). The product download screen opens.
Device Menu
Firmware Panel
for PCS).
1
).
1
on page 40.
on page 45.
34