Tcp/Ip Panel; Offline Device Preview - Extron electronics FOX3 T 301 User Manual

TCP/IP Panel

The TCP/IP panel connects PCS to a specific device through Ethernet.
Figure 23.
1. Click the TCP/IP tab (see figure 23,
2. In the IP Address/Hostname field (
NOTE: If the IP address has not been changed, it is 192.168.254.254.
3. In the Password field (
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron (see
Panel
4. In the Port field (
NOTE: Select the Show Characters checkbox (
characters.
5. Click the Connect button (

Offline Device Preview

Opening a new device tab for an offline device displays the interface and configuration
options for the device without connecting to it. However, settings cannot be changed.
To open a scaler device tab:
1. From the Configuration File drop-down list, select New Configuration File (see
figure 24).
Figure 24.
Comm Port Selection Windows
1
2
), enter the device password.
3
on page 46 to change a password).
), enter the port 22023 of the desired device.
4
). A new device tab opens.
6
Configuration File Drop-Down List
FOX3 T/R 301/311 Transmitters and Receivers • Configuration Software
).
), enter the IP address of the desired device.
Roles and Permissions
) to display the password
5
36