Front Panel Features; Outside-The-Faceplate Features - Extron electronics FOX T UWP 302 User Manual

Front Panel Features

Outside-the-Faceplate Features

A
Figure 3.
A
B
C
D
POWER COMPUTER INPUT
PC
HDMI
HDCP
AUDIO
FOX T UWP 302 Outside-the-Faceplate Features
LED indicators
Power LED — Lights when the device receives 12 V from an external power supply.
PC LED — Lights when a computer input is detected.
HDMI LED — Lights when an HDMI input is detected.
HDCP LED — Lights if the HDMI input signal is HDCP encrypted.
Audio LED — Lights in one of the following ways when the transmitter detects audio
on the selected input:
Lights when an analog audio signal remains above -44 dBV but turns off after the
•
audio signal level drops below the threshold continuously for 10 seconds.
Lights when the transmitter detects digital embedded audio.
•
Audio Input connector — Connect an audio source to the 3.5 mm tip-ring-sleeve
(TRS) connector.
Tip (L)
Ring (R)
Sleeve ( )
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 4. Wiring for Unbalanced Stereo Audio
Computer Input connector — Connect a video source to the female 15-pin HD
connector.
HDMI input connector — Connect a source device to the HDMI connector. This
connector can accept HDMI, DVI, or dual mode DisplayPort video signals.
FOX T UWP 302 Wallplate Transmitter • Installation and Operation
AUDIO INPUT
HDMI INPUT
B
C
D
8