Advanced - NovaStar NovaPro UHD User Manual

Menu

Advanced

Reset
Figure 5-8 Layer parameter descriptions
Figure 5-9 Input crop
5.4.1.2 Advanced
Copy
Add a new layer displaying the cloned or mirrored image.
Menu
Status
Initial X
www.novastar.tech
Description
the current input source. The default value is 0.
Initial Y: The vertical initial coordinate of the part after cropping upon the

current input source. The default value is 0.
Set the copying, flipping and other properties of the layer.
For details, please see 5.4.1.2
Reset all the layer settings to defaults.
Description
Turn on or turn off the layer copying function.
The options are None, Clone, Left Mirror and Right Mirror.
None indicates turning off the function.
Set the horizontal initial coordinate of the new layer.
NovaPro UHD All-in-One Controller User Manual
Advanced.
7