Input Settings; Dvi Input Mode - NovaStar NovaPro UHD User Manual

Menu
Figure 5-20 Capturing

5.5 Input Settings

5.5.1 DVI Input Mode

This menu can be shown and set only when the DVI input card is installed. If no DVI card is installed, this
menu is hidden.
DVI input card supports Single Link and Dual Link modes.
Single Link: 4 × Single link DVI connectors, each with the resolutions up to

1920×1080@60Hz
Dual Link: 2 × Dual-link DVI connector (connectors 2 & 4) , each with the resolutions up to

3840×1080@60Hz
Figure 5-21 Single link mode
Figure 5-22 Dual link mode
www.novastar.tech
Description
The location name consists of two parts: BKG and a number.
At most 16 BKG images can be saved.
Capture: Save the captured input source image to the selected

location.
Note:
If the AUX signal source is set to PGM or PVW and the source for capturing
is PVW or PGM, the AUX display will flicker during BKG capturing.
NovaPro UHD All-in-One Controller User Manual
14