Cabinet Connection - NovaStar NovaPro UHD User Manual

6.2.2 Cabinet Connection

Step 1
Click to select the output Ethernet port on the left.
Step 2
Drag to select the cabinets loaded by the Ethernet port.
Step 3
Go to Edit > Cabinet Connection to select a connection type. 8 connection types are supported.
Step 4
Click Send in the toolbar to send the screen configuration to the receiving card.
Note:
After the Ethernet port is selected, you can click the cabinets in turn according to the cabinet connection of
LED screen to complete the whole connections.
Canvas Settings
Click the blank area on the canvas and select Canvas to set the canvas-related properties.
Item
Grid Color
Grid Width
Grid Height
Screen Name
Disable Edit
Figure 6-4 Canvas settings
Screen Color Settings
Set the screen color related parameters. Click the Color tab to set the screen color.
Customize the brightness, Gamma and color temperature.

Enable 18-bit mode.

Enable ClearView.

Select the calibration type.

Customize the color gamut.

Enable PAL or NTSC.

www.novastar.tech
Description
Set the color of the canvas grid.
Set the width of the canvas grid (unit: pixel).
Set the height of the canvas grid (unit: pixel).
Name the screen currently configured.
When selected, any operations to the canvas are prohibited.
NovaPro UHD All-in-One Controller User Manual
27