Input Source; Input Source Resolution - NovaStar NovaPro UHD User Manual

5.5.2 Input Source

The NovaPro UHD offers SDI-1, SDI-2, SDI-3, SDI-4, INPUT1, INPUT2, INPUT3, INPUT4, DP and HDMI
input connectors.
The input source is named after the input connector.
Rotate the knob to select the desired input source and press the knob to enter the input source resolution
menu.
Note:
When DP is selected as the input source and the DP source is from the VIO 4K from ANALOG WAY, hold
down the ESC button on the device front panel to enter the Parameter Settings screen and turn on SWING
Configuration.

5.5.3 Input Source Resolution

Adjust the resolution and frame rate of the input source through the following two ways.
Standard resolution

Custom resolution

Figure 5-23 Setting input source resolution
Note:
The SDI does not support the input resolution settings.
Standard Resolution
Select a standard resolution and frame rate. Rotate the knob to select Apply and press the knob to make the
settings take effect. If you do not press the knob, the settings will not take effect.
Figure 5-24 Standard resolution
Custom Resolution
Set a custom width, height and frame rate. Then rotate the knob to select Apply and press the knob to make
the settings take effect. If you do not press the knob, the settings will not take effect.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
15