Fn Button; Monitor; Miscellaneous - NovaStar NovaPro UHD User Manual

5.9.3 FN Button

The FN button on the device front panel can be customized to a shortcut button for the functions including
Synchronization, Capture, Quick Configuration and Output Color.
Press the button to enter the function menu screen.

Hold down the button to customize the function for the button.


5.9.4 Monitor

Set to monitor all input sources, PVW and PGM and one of them.
Menu
All
Single

5.9.5 Miscellaneous

Output Frame Rate
Set the output frame rate of the image output by Ethernet port. The default setting is 60 Hz.
Return to Home
Set the period of time during which the system stays at the current page before returning to the homepage
automatically when there is no operation performed. The default setting is 60s and the maximum value is
3600s.
USB Backup/Restore
Back up the data to a USB drive or restore the data from the USB drive.
Menu
USB Backup
USB Restore
Figure 5-33 USB backup/restore
Date and Time
Set the device date and time.
Menu
Date
Time
Change Date and Time
Self-Test
Device Parameter Self-Test: When problems occur on the device, you can use this

www.novastar.tech
Description
Set to monitor all input sources, PVW and PGM.
Set to monitor the selected input source, PVW or PGM.
Description
Back up the following information to a USB drive, including the configured presets, PVW
and PGM data, LOGO, OSD, BKG, screen configuration, screen brightness, input
source color, color range information, AUX data, synchronization settings, hot backup
settings, output frame rate, HDR data, low latency settings, OPT mode, display control
information and communication settings.
Restore the backup files from the USB drive.
Description
Display the device date.
Display the device time.
Adjust the Year, Month, Day, Hour, Minute and Second values to change the
device date and time.
NovaPro UHD All-in-One Controller User Manual
22