Rear Panel - NovaStar NovaPro UHD User Manual

Button
Function buttons
ESC button
USB ports

3.2 Rear Panel

Note:
The NovaPro UHD supports replacement of an input card. D_4×HDMI 1.3 input card is the default
configuration, which can be replaced by a D_4×DVI input card.
Input
Connector
12G-SDI
www.novastar.tech
Function
Navigation button: Hold it down to enter or exit the quick navigation screen.

FTB: Make the LED screen to fade to black.

LOGO: Enter the LOGO menu screen.

PRESET: Enter the preset menu screen.

FREEZE: Freeze the output image displayed on LED screen.

OSD: Enter the OSD menu screen.

FN: Custom function button. Press it to enter the function menu screen and hold

it down to customize the function for the button.
TEST: Enter the test pattern menu screen.

BKG: Enter the BKG menu screen.

TAKE: Send the PVW to PGM with a transition effect. A total of 16 transition

effects are supported.
CUT: Send the PVW directly to PGM without a transition effect.

Press the button to exit the current menu or cancel the operation.
2 × USB ports
Insert a USB drive to perform system update.

Connect a mouse or keyboard.

Quantity Description
4 Supports ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G) and ST-292
(HD) standard video inputs.
Input resolutions up to 4K×2K@60Hz and downward compatible
Supports 12G-SDI output with loop-through.
Note:
When the input source is a 12G-SDI signal, you must use CANARE / L-
4.5CHD+ / UHDTV-SDI SDI cables and the cable length should be less
NovaPro UHD All-in-One Controller User Manual
3