5.9 General Settings
Figure 5-31 General settings
5.9.1 Synchronization
Select a synchronization signal to synchronize all the cascaded devices.
Step 1
Rotate the knob to select Synchronization and press the knob to enter the submenu.
Step 2
Rotate the knob to set the synchronization status and source respectively.
Menu
Status
Source
5.9.2 Hot Backup
The NovaPro UHD supports two hot backup modes: Set as Primary and Set as Backup.
Menu
Set as Primary
Set as Backup
Set as Normal
Figure 5-32 Data flow for Primary and Backup modes
www.novastar.tech
Description
Turn on or turn off the synchronization function. The default option is Off.
Select Genlock or other input sources as the sync source.
Description
In device backup applications, when the device is set as the primary device, it cannot
be used for Ethernet port backup.
In device backup applications, when the device is set as the backup device, it cannot
be used for Ethernet port backup.
The device is not used for any backup.
NovaPro UHD All-in-One Controller User Manual
21