Preset Settings - NovaStar NovaPro UHD User Manual


None: Do not copy the layer.

Clone: Add a new layer which is the same as the original one. The two layers are symmetric
horizontally by default.

Left Mirror: Add a mirrored layer on the left of the original layer. The two layers display mirrored
images.

Right Mirror: Add a mirrored layer on the right of the original layer. The two layers display mirrored
images.

X: Set the horizontal initial coordinate of the new layer.

6.3.5 Preset Settings

16 presets are supported in layer configuration. The preset will be saved to the software automatically after
you have set it, which is easier for future use.
Step 1
In the Preset area, click to select a preset.
Step 2
In the PVW area, add a layer and set its size and position.
Note:
The preset includes layer-related information, as well as BKG, LOGO and OSD configuration.
Step 3
Click Save to save the layer configurations to the preset.
: The preset with no data
: The preset with data
: The preset being edited currently
: The preset loaded currently
Select a preset with data, then click Load to load the preset to PVW.

Select a preset with data, then click Clear to clear the preset data.

Click Clear All to clear all the preset data.

Note:
Double click to rename the preset. Only the saved preset can be renamed.
If you hover on a preset icon, the preset name is displayed.
Figure 6-16 Preset settings
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
42