Driving; Operating The Roller - Fayat Group Dynapac CC900G Instruction Manual

3
2
Figure. Instrument panel
1. Starter switch
2. Speed control
3. Parking brake
6. Forward/Reverse lever
8. Sprinkler knob
10. Emergency stop
36

Driving

Operating the roller

Under no circumstances is the machine to be Under no circumstances is the machine to be
operated from the ground. The operator must be operated from the ground. The operator must be
seated at the machine during all operation. seated at the machine during all operation.
8
Move the speed control (2) down to its working
10
position.
Deactivate the parking brake (3). Be prepared that the
roller can move.
1
Check that the steering is working correctly by turning
6
the steering wheel once to the right and once to the
left while the roller is stationary.
When compacting asphalt, remember to turn on the
sprinkler system (8).
Make sure that the area in front of and behind the Make sure that the area in front of and behind the
roller is clear. roller is clear.
Carefully move the forward/reverse lever (6) forwards
or backwards, depending on which direction of travel
is required.
Speed increases as the lever is moved away from the
neutral position.
The speed should always be controlled using the The speed should always be controlled using the
forward/reverse lever and never by changing the forward/reverse lever and never by changing the
engine speed. engine speed.
Test the function of the reserve brake by activating Test the function of the reserve brake by activating
the parking brake (3) while the roller is moving the parking brake (3) while the roller is moving
slowly forwards and backwards. slowly forwards and backwards.
Check when operating that the warning lamps do not
come on.
4812163901_A.pdf
Operation
2019-09-23