1.
1.
Product plate - Product Identification Number (PIN), model/type designation
Product plate - Product Identification Number (PIN), model/type designation
2.
2.
Engine plate - Type description, product and serial numbers
Engine plate - Type description, product and serial numbers
3.
3.
ROPS plate - Certification, product and serial numbers
ROPS plate - Certification, product and serial numbers
4.
4.
Component plate, drum - Product and serial numbers
Component plate, drum - Product and serial numbers
Fig. Operator's platform, left side
1. Machine plate
22
ROPS structure without first having discussed the
modification with Dynapac's production unit. Dynapac
determines whether the modification could result in the
approval according to the ROPS standards becoming
invalid.
Identification
Product and component plates
2
4
Machine plate
1
The machine plate (1) is attached to the front left side
of the rear frame, beside the steering joint.
The plate specifies the manufacturers name and
address, the type of machine, the PIN, Product
Identification Number (serial number), operating
weight, engine power and year of manufacture. CE
markings and the year of manufacture may be omitted
on machines supplied to markets outside the EU.
4812163901_A.pdf
Machine description
3
1
4
2019-09-23