3
Figure. Instrument panel
3. Parking brake
12. Brake warning lamp
2019-09-23
Maintenance - 50h
Every 50 hours of operation (Weekly)
Brakes - Check
Drive the roller slowly forwards.
Activate the parking brake (3). The brake warning
lamp (12) should light and the roller should stop.
After testing the brakes, set the forward/reverse lever
in neutral.
Deactivate the parking brake (3).
12
The roller can now be started.
Refer also to the section for operation.
4812163901_A.pdf
Park the roller on a level surface.
Park the roller on a level surface.
The engine must be switched off and the
The engine must be switched off and the
parking brake activated when checking or
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
adjusting the roller, unless otherwise specified.
Check that the engine cover is fully open before
Check that the engine cover is fully open before
carrying out work underneath it.
carrying out work underneath it.
Check the brakes by carrying out the following:
Check the brakes by carrying out the following:
Maintenance - 50h
67