Unpacking The System; Quick Start-Up - Xycom 3510T System Manual

3510T/3510KP/3512T/3512KP System Manual
•
2005-RMA 19 inch Rack Mount Adapter Plate (3510KP, 3512KP)

Unpacking the System

When you remove the system from its box, verify that you have the parts listed
below. Save the box and inner wrapping in the event you need to reship the unit.
•
3510T/3512T or Keypad version
•
Documentation kit, which includes:
•
Business reply card
If you ordered the system with a touchscreen installed, you will also receive a
touchscreen driver diskette and manual.

Quick Start-up

This section gives you the steps to get the systems up and running without explaining
the capabilities and options of the system.
Turn off power to the unit and disconnect the power cord before making any
adjustments to the inside or outside of the computer.
To prepare the system for use, perform the following steps.
1. Attach optional keyboard to the keyboard port.
2. Attach other optional equipment following the instructions in Chapter 3.
3. Attach the power cord from the power receptacle to a properly grounded 115/230
VAC, 50-60 Hz outlet, or 24 VDC outlet, whichever applies. (See Chapter 3,
Creating a Power Cable.)
1-4
Power connector
•
Diagnostic software diskette
•
14 10-32 hex nuts (2 spares)
•
Clip-on Ferrite for mouse cables
•
Cable clamp and screw (for strain relief of power cord)
•
3510/3512 manual
•
CPU manual (CD-ROM)
•
Utility diskettes
•
Warning