Xycom 3510T System Manual page 53

ASCII/Hex/Decimal chooses the format to display the keystrokes as they are
entered. Default is ASCII. Click is not supported.
To select a key to define, use the arrow keys to position the cursor on the desired key
and press
external full-stroke keyboard in a macro assigned to the chosen key. As the keys are
entered they are displayed using the chosen format.
to the Teach Menu, so it is not a recordable key. However,
macro by using the editor. Changes made to the macros in the Teach Menu are not
programmed until you select Download.
Edit
Displays a graphic representation of the keypad in memory and a menu bar
displaying Exit, Click, and ON/OFF. Exit returns to the Macros menu. Click is not
supported. To select a key to edit, use the arrow keys to position the cursor on the
desired key and press
In edit mode, the macro is displayed as two lines. The top line (the edit line) displays
the macro in either hex or decimal format and is the line in which the actual editing
takes place. The bottom line (the ASCII line) displays the macro in ASCII format
and is not user configurable. This line helps keep track of which part of the macro
you are editing, and will be updated by the utility as editing takes place. For
example,
edit line 12 75 F0 75 F0 12 1C F0 1C 12 22 F0 22 F0 12 0
ASCII line
The insert, delete, and cursor control keys are active for editing.
When a key is selected from the Edit Macro option, the menu bar displays the
following choices: Exit, Cut, Copy, Paste, Codes, Hex/Decimal,
and I/O (Insert/Overtype). The macro for the chosen key is also displayed.
Cut
Deletes a sequence of scan codes from the macro. To select a section to cut:
1. Place the cursor on the first character to cut.
2. Press
3. Press
Edit line. Move the cursor on the last character to cut and press
4. The last character of every macro is the end of the macro (EOM) and cannot be
deleted.
Copy
Copies a sequence of scan codes from the macro into memory. To select the section
to copy:
1. Place the cursor on the first character to copy. Press
. After a key is selected, the utility records every key stroke on the
ENTER
.
ENTER
sh 8 bk 8 bk sh a bk a
1 and select .
F CUT
. Cut should still be highlighted, but the cursor will appear on the
ENTER
stops recording and returns
ESC
ESC
sh X bk X bk sh EOM
1 and select Copy.
F
Chapter 4 –Keypad Utility
can be included in a
.
ENTER
4-5