Preparation For Use - Otto Bock 1WR95 Aqua Foot Instructions For Use Manual

NOTICE
Risk of loss of function due to incorrect care
The waterproof walking device must be cleaned with clean fresh water
every time after contact with saltwater or water containing chlorine/soap
or contact with abrasive substances (e.g. sand). To clean the prosthe-
sis, it should be placed in a sink (tub) with clean freshwater and moved
around to rinse the corners, edges, and the tube.
The prosthesis must also be dried immediately after every use.
Contact with abrasive substance (e.g. sand) can lead to premature wear.
4 Scope of delivery
The scope of delivery is shown on the cover page and includes either the
modular version with installed plug or the exoskeletal version with included plug.

5 Preparation for use

INFORMATION
According to the Ottobock alignment recommendations, bench align-
ment of the waterproof walking device with the 1WR95 Aqua Foot on
0 mm heel height is usually only possible with the aid of the angled tube
adapter. Therefore you should use the 2WR95=1 tube adapter which is
angled at the top. If necessary, the 2WR95 straight tube adapter can
be used in the thigh area for TF amputees.
5.1 Bench alignment
Align TF modular prostheses in compliance with the „Alignment Recom-
mendations for TF Modular Lower Limb Prostheses according to MOBIS®"
(order no.: 646F219):
1) Move the mid-foot forward 30 mm relative to the alignment reference line.
2) Set the effective heel height of the foot and add 5 mm.
3) Set the outward rotation of the foot.
Follow the instructions in the respective knee joint's instructions for use for
the remainder of the bench alignment.
Ottobock | 13