Otto Bock E-MAG Active 17B203-L Instructions For Use Manual page 33

9
10
Fabricating the casing
CAUTION
Risk of damage due to improper installation
Ensure that no notches are made in the joint bar material during milling since this creates predetermined breaking
points.
NOTICE
Risk of damage due to improper installation
Incorrect installation can cause malfunctions and/or damage to the orthotic knee joint. Please observe the follow­
ing safety instructions:
► Follow the instructions for use provided for the charger and battery.
► Use the supplied dummies. Do not process joint or electronic components directly.
► Follow the installation instructions and the sequence of the individual steps (see Section 3.1).
This section describes how to fabricate a casing for protecting and retaining cables and electronic components.
11
17B203=* E-MAG Active
Reinforce the orthosis according to the requirements of
the patient profile.
Lateral view.
INFORMATION:
The 646T5441 technical information for orthosis
fabrication titled "Fabricating a definitive knee-
ankle-foot orthosis" can be optionally used. Avail­
able in German and English. Other languages
available on request.
Cut the lamination dummy free.
Preparation for use
33