Intended Use - Otto Bock E-MAG Active 17B203-L Instructions For Use Manual

Intended use

3 Intended use
3.1 Indications for use
The product is intended exclusively for orthotic devices for the lower limbs, for dynamic knee-ankle-foot orthoses
and knee orthoses with a free swing phase and locked stance phase. The manufacturer recommends that the
orthotic knee joint be processed using lamination technology or carbon prepreg technology when used on one side
of the body and in pairs.
3.2 Indications
INFORMATION
To ensure optimal functionality of the orthosis, the patient must generate a knee extension moment before heel lift-
off and also at heel impact.
Partial or total paralysis of the leg muscles.
Indications must be determined by the physician.
Ottobock recommends the 646A214 "Therapeutic Application and Gait Training" brochure.
3.3 Contraindications
Contraindications:
• Contractions in the knee joint that prevent the knee joint lock from being relieved
• Uncontrollable spasticity
• Tuberosity supports
Additional contraindications when used without a medial support:
• Non-physiological deviations in the frontal plane
• Non-physiological deviations in the sagittal plane
• Instabilities of the capsular/ligamentous apparatus
Additional contraindications when used with a medial support:
• Flexion contractures in excess of 15°
3.4 Support
Your national Ottobock team will be happy to answer any technical questions. Contact addresses and telephone
numbers are listed on the last page of this manual.
4 Safety
4.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
4.2 Safety instructions
CAUTION
Risk of falling due to improper use
Provide your patient with precise instructions on the operation and use of the E-MAG Active. Be sure to inform
your patient that, in case of improper use, the joint cannot release prior to toe-off or the swing phase, or cannot
lock prior to heel strike. Also inform your patient of the PreLock function.
CAUTION
Mechanical damage to the product
Injuries due to changes in or loss of functionality
► Use caution when working with the product.
► Check the product for proper function and readiness for use.
► In case of changes in or loss of functionality, discontinue use of the product and have it checked by author­
ised, qualified personnel.
28 17B203=* E-MAG Active