Fan Replacement - Siemens SIPLUS HCS3200 Operating Instructions Manual

11.4

Fan replacement

Electric shock hazard
May cause death or serious injury
The line voltage has to be disconnected and secured against switching on again before
opening the enclosure door.
NOTICE
You must install a fan of the same type in the device.
You will find a replacement fan in section Ordering data (Page 68).
Preparations
1. Switch off the line voltage and secure against switching on again
2. Switch off the 24 V DC power supply of the HCS3200
3. Open the enclosure door
Tool
You will need a 2.5 mm slot screwdriver.
SIPLUS HCS3200
Operating Instructions, 07/2014, A5E31278506C/002
WARNING
Service and maintenance
11.4 Fan replacement
57