socomec ATyS s Instruction Manual page 57

• Run the program on your computer and follow the instructions so as to install the Software. Once installed,
open the software by clicking on: Start -> All Programs -> Socomec -> EasyConfig. The software is best
viewed with a resolution of 1280 x 1024
• Select your language from the drop box on the top, right hand side of the screen.
• A user with rights may change profile and access advanced settings by clicking on "Change Profile"
This allows to select a profile from a User / Administrator / Super User / Socomec.
The SOCOMEC profile is only available for SOCOMEC internal use.
Change of profile will require a password that may be set by the User
Profile
User
Administrator
Super User
Socomec
RefertospecificEasyconfiginstructionmanualonwww.socomec.comfordetailsregarding
ATYS p - 542001E - SOCOMEC
Functionsthatmaybeperform
1. User can add a device in the Easy Config Tool.
2. User can get the configuration from a device.
3. User can create a new configuration for the device.
1. All the function that a user can perform +
2. User can send configuration to the device.
3. User can delete a declared device.
4. User can update the device connection parameters.
1. All the function that Administrator can perform +
2. The User can change and save the passwords for the
Administrator and the Super User.
1. Not Used
Easy ConfigProgramming.
PasswordbyDefault
No password is required for
this profile
Password by default :
SocoAdm
Password by default :
sOcOmec
Not Used
EN 57