socomec ATyS s Instruction Manual page 34

6.3.7. ExternalPowersupply(400 VAC-230 VAC)
Power Transformer intended for 400 VAC, Phase to Phase voltage applications that do not provide the availability
of a neutral conductor. Transformer data: 400 VAC – 230 VAC: 200VA. The ATyS p will require 2 transformers to be
connected as shown.
Source 1 Source 2
400 Vac 400 Vac
230 Vac 230 Vac
6.3.8.Raisedmountingspacers
Available for 125 A to 630 A ratings only
Frames B3, B4 and B5
1 set including 2 spacers raises the device's
terminals 10 mm away from the bottom of
the enclosure or frame on which the device is
mounted. These may also be used to replace
the original mounting spacers.
34 EN
ATYS p - 542001E - SOCOMEC