socomec ATyS s Instruction Manual page 136

AnnexeII-28.1.Detailledevents
Function 6 and 16 Codes
• Command Zone R1
NOTE: When zone R1 is completed with value 1, zone R2 automatically fils in with the last saved value. At the end
of this operation, writing 0xFFFE in zone R1 enables the reading of the next data.
Dec. Hex.
Address Address
24320 5F00
24321 5F01
Function 3 Codes
• Data Zone R2
Dec. Hex.
Address Address
24336 5F10
24337 5F11
136 EN
Words Description
count
1 Action
0x0001: Reset read pointer
0xFFFE: Get next data
1 Filtering action - If not written, no filtering is done
To use filtering, entire table should be written in one time with
function 16
0x00XX: only get events in the form XXyy
0xFFFF: no filter
Words Description
count
1 record count
If record count == 0xFFFF, it means that filtering process is not
done now, so the reader has to re-read the table to get the
values.
1 record size
If record size == 0xFFFF, it means that filtering process is not
done now, so the reader has to re-read the table to get the
values.
120 8 * Event data record
Unit
Unit
nb words
ATYS p - 542001E - SOCOMEC